Home / Installation Guide

Setup

Set up your Salah Time Cast in minutes.

The device is plug-and-play. Connect it to any TV with the HDMI cable in the box, plug in the power adapter, and your masjid’s Salah screen is live. No computer and no technician needed.


Before you start

What is in the box, and what else you need.

In the box

✓ Salah Time Cast device
✓ 5V USB power adapter
✓ HDMI cable
✓ Quick start card

You will also need

✓ A TV, monitor or projector with a free HDMI port — up to 95″
✓ A power socket within reach of the screen
✓ An Android phone for the Musef companion app
✓ Your masjid’s Taqwim, or its own Salah and Iqamah timings

Step by step

Eight steps from box to screen.

1

Place the device

Position it near the screen, within reach of the HDMI cable and a power socket. Keep it ventilated and out of direct sunlight.

2

Connect the HDMI cable

Plug one end into the device and the other into any free HDMI port on your TV, monitor or projector. Note which port number you used.

3

Connect the power

Plug the 5V USB adapter into the device and into the socket. The device is built to run 24×7 and draws very little power.

4

Switch the screen to that input

Use the Source or Input button on your TV remote and select the HDMI port you used in step 2.

5

Let it start up

The Salah screen appears on its own within about a minute, showing prayer times, the Iqamah countdown and the hall temperature.

6

Install the Musef app

Install the Musef companion app on an Android phone, then follow the pairing steps shown in the app to connect it to your device.

7

Set your timings

Choose your Taqwim, or enter your masjid’s own Salah and Iqamah timings. The built-in RTC keeps them accurate, and they survive power cuts.

8

Choose a theme

Pick Midnight, Ivory, Emerald or Ramadan so the screen suits your hall. You can change it any time from the app.


If something looks wrong

Three quick checks.

◈

Nothing on the screen

Check the TV is on the same HDMI input you plugged into, and that the power adapter is firmly connected. If it still stays blank, try another HDMI port.

◑

The timings look wrong

Open the Musef app and confirm the selected Taqwim, or enter your masjid’s timings manually. Changes appear on the screen straight away.

✦

After a power cut

The device restarts by itself and keeps your settings. If the screen is blank, switch the TV back to the right HDMI input.

Need a hand setting it up?

Free setup support on WhatsApp, in English, Hindi, Urdu or Gujarati. Every device carries a 2-year warranty.

Chat on WhatsApp